If you are looking to naturally desinfect surfaces and rooms, this product category consists of UVC air disinfection units that remove mold and the use for chemical products. They are used in cold chambers, in production chains, and white rooms.
The place and position of UVC sterilization wall and ceiling modules in a room depends on the purpose of the room, human activities in it and its specifics. UVC wall and ceiling modules are connected to a special circuit that allows them to be manually or automatically turned on or off. During the operation of UVC wall and ceiling modules, people must not stay in the premises, unless they are protected by protective suits and glasses against UVC radiation. UVC wall and ceiling modules are exclusively in function when people are not indoors, outside working hours or at night.
The approximate value of the installed power of UVC radiation of sterilization wall and ceiling modules in a room is 1W / m² of the room surface.
During the operation of UVC sterilization wall and ceiling modules, in addition to disinfection of the internal surfaces of the room, disinfection of the air in the rooms is also performed. Due to the natural circulation of air in the room (a consequence of the difference in air temperature of the upper and lower layers), the air will move through the UVC wall and ceiling modules and thus disinfect.
On the page Myth of Fact about UVC technology the most common misconceptions that users encounter are clarified.